Eduard Chattanooga Choo-Choo P-51D-5 Limited Edition
1:48 Scale

The P-51 Mustang requires no introduction as one of history’s most famous aircraft, the highest-scoring Allied aircraft of WWII, and one of the most widely produced and popular model kits in most scales.  Approximately 430 injection-molded kits of the P-51 have been released to date, from 1:144 to 1:24 scales.  Nearly every plastic kit manufacturer has taken a crack at the P-51 since 1951.  In 2019, Eduard launched their long-anticipated family of 1:48 scale Mustangs with a Limited Edition release first available at the 2019 IPMS/USA Nationals.  Only a few thousand were made, and they are currently pretty rare.  Still, it was their first release of the kit, so we’ll kick off our comprehensive survey of the Eduard family of 1:48 scale P-51Ds with the Chattanooga Choo Choo.     

The origins of the P-51 go back to early 1940.  It was not intended for the U. S Army Corps where it gained its greatest fame – but for the RAF.  The U. K. was seeking a stopgap fighter to help hold the line against the German Luftwaffe.  Great Britain’s Purchasing Commission approached North American Aviation to build Curtiss P-40s under license for the RAF.  Instead, North American pitched an alternative:  a new fighter that would be easier and faster to produce, and that would also outperform the P-40.  The British accepted the offer and placed an order for 340 of the new aircraft in March 1940.  On September 9th, a design team headed by NAA’s “Dutch” Kindelberger finished the prototype NA-73X airframe.  It was a rapid developmental process by any standard, even during the war:  a mere 102 days had passed between contract signature and roll-out.

The NA-73X first flew on 26 October.  It featured a revolutionary laminar flow airfoil wing derived from NACA flight test data and an innovative under-fuselage ducted engine cooling system.  Mustangs were very fast, maneuverable, and well-armed.  Early versions entered production in May 1941 and went into combat with the RAF 11 months later.  These were powered by Allison engines and were typically equipped with two .50-calibre nose-mounted and four .30-calibre wing-mounted machine guns.  The 1,100hp Allison V-1710-39 powerplant provided impressive performance, but only up to about 15,000 feet.  RAF Mustang Mark Is and IIs were soon followed by the improved P-51As, Bs, and Cs operated by the USAAF and the RAF.  British experimentation with the supercharged Merlin powerplant provided for outstanding high-altitude performance, and by mid-1943, Packard-built Merlin engines became standard for new build P-51s. 

The definitive P-51D variant was fitted with a Plexiglas bubble canopy providing excellent 360-degree visibility, and the aircraft could reach around 440 MPH with a service ceiling just shy of 42,000 feet.  Armament consisted of six wing-mounted .50 caliber machine guns while underwing pylons permitted the use of range-extending drop tanks, along with rockets and bombs.  There were various production blocks and sub-variants of the P-51D.  The first 100 P-51D-1s went to Australia, and the next 1,000 airframes were P-51D-5s.  The vertical stabilizer design of the P-51C was carried over, but in the new configuration, directional stability suffered.  The addition of a tail fillet on the leading edge of the vertical stabilizer solved the problem.  The tail fillet became standard on the D-10 and all later production versions.  However, some late D-5s were fitted with the tail fillet. Various late-production airframes produced in the Dallas factory were “early adopters” of the fillet before P-51D-10 production commenced. Yet other D-5s already in service were field retrofitted using a tail fillet kit. Many other D-5s flew on with no modification until they were taken out of service.

During WWII, the P-51 saw action in the European, North African, Mediterranean, and Pacific theaters.  Mustangs claimed 4,950 air-to-air kills.  In USAAF service, P-51Bs and Cs were used by the Eighth Air Force to escort bombers in raids over “Fortress Europe” beginning in 1943.  The P-51D took over that role by mid-1944.  Mustangs were
used increasingly as ground attack aircraft as well.  By the start of the Korean War, the Mustang had been re-designated F-51 and it served as the front-line fighter until the F-84 and F-86 arrived on the scene.  The “Cadillac of the Skies” served with Air National Guard Units until 1957 and the last Mustang in USAF service was retired in 1978.  In foreign service, the Dominican Republic retired its last operational P-51 in 1984.  Today, only a handful of P-51s still fly as warbirds with private owners.

Eduard’s 1:48 scale Chattanooga Choo Choo Limited Edition contains one P-51D-5 kit on five injection molded polystyrene sprues containing 216 parts (about 70 parts are not used in this version of the kit).  Seventeen clear parts come on one clear sprue.  This Limited Edition set also has 63 photoetched metal detail parts included on one fret (most of them are pre-painted).  There’s also a pre-cut self-adhesive masking set and one decal sheet.  The full color instruction booklet organizes the build over 12 pages.  Markings for six airplanes include:

  • P-51D-5 44-13535, “Chattanooga Choo Choo,” flown by Lt. Edward F. Pogue, 79th FS, 20th FG, 8th AF, Kings Cliffe, United Kingdom, 1945
  • P-51D-5 44-13984, “Meg,” flown by Lt. Clarence Boretsky, 334th FS, 4th FG, 8th AF, Debden, United Kingdom, Fall 1944
  • P-51D-5 44-13298, “Marie,” flown by Capt. Freddie F. Ohr, 2nd FS, 52nd FG, 15th AF, Madna, Italy, Fall 1944
  • P-51D-5 44-13783, “Rovin’ Rhoda,” flown by Lt. Irving Snedeker, 364th FS, 357th FG, 8th AF, Leiston, United Kingdom, April 1945
  • P-51D-5 44-13677, “Miss Steve,” flown by Lt. William G. Cullerton, 357th FS, 355th FG, 8th AF, Steeple Morden, United Kingdom, 1944
  • P-51D-5 44-13893, “Caroline,” flown by Lt. Thomas P. Smith, 370th FS, 359th FG, 8th AF, East Wretham, United Kingdom, 1945

Strengths:  Over the last decade, Eduard has produced some truly superlative 1:48 scale injection-molded model kits, starting with their family of Spitfires, Bf 109s, Fw 190s, and now, their P-51D.  Since the 1990s, Tamiya reigned with their excellent 1:48 scale P-51D, despite much newer releases by Meng and Airfix.  While the Tamiya P-51D is still excellent, I think that Eduard can indeed claim “best 1:48 scale P-51D” with this kit.

As a self-admitted, life-long Mustang fan, I had been looking forward to this release for some time, but also a little worried that Eduard might make some of the same errors in detail committed by the recent Meng and Airfix kits (e.g., lots of rivets on the wings, thick panel lines).  The first impression one gets from their very first look at these sprues involves the accurate surface details.  While the P-51 had thousands of rivets on the tops of the wings, they were filled with putty during the manufacturing process and sanded smooth to help achieve an uninterrupted laminar flow over the wing surfaces.  Eduard has nailed the relatively featureless wing surfaces.  Furthermore, the rivet/fastener details on the fuselage and tail surfaces are as exquisite as they are sublime.  Exterior surface detail is, in a word, exceptional.  I also test fit the fuselage halves and wings.  In a word, basic fit appears airtight.  The only fit that seems not virtually seamless involves the upper wing roots.  It looks just a little fiddly, but I suspect that when all the assemblies come together, the fit should be far more stable and precise.     

Eduard’s P-51D has a number of building options, including an open or closed canopy, separate landing flaps, ailerons, rudders, elevators, and radiator exhaust, three different styles of canopies, single or dual rear-view mirrors, and shrouded or unshrouded exhaust stacks.  Optional paper or metal-style external fuel tanks are also provided.  Other building options found on the sprues aren’t used in this issue of the kit, including the uncuffed propeller, bombs, rockets, and a second, alternate tail fillet (used in later model P-51Ds).  In this kit, the details of the D-5 look very well represented, including the early cockpit interior and exterior.  I find it interesting that Eduard chose to do a non-standard P-51D-5 that featured the tail fillet.  It’s a unique configuration.

The cockpit on its own is very impressive, with separate frames for the sidewalls, a multi-part seat, and excellent representations of the radio, battery, and fuel tank, down to the separate parts for the wiring and fuel line.  The really impressive elements here are the photoetched parts which add a great deal of detail and visually interesting features to the cockpit, such as the pre-painted instrument dial faces, the gorgeous pre-painted harnesses (complete with simulated stitching details), various placards, and the photoetched throttles, trim wheel, and other parts.  In sum, the cockpit is a real knockout.

The main gear well builds up from about 16 parts, and it is very rich with detail, from the textures of the parts and ribs to the fuel lines and pump details.  All that’s missing are the smaller hydraulic and electrical lines, and the builder can add these relatively easily if they wish.  There’s also a fully enclosed tail wheel well that looks excellent.  Another nice feature is a single-piece gun port section on each wing.  Unlike the Tamiya kit, for example, the gun barrels do not assemble out of upper and lower halves resulting in some tricky seam work.  Eduard’s engineering approach here is excellent.  Also note that on the interior of the wings, there’s a blanking plate on the inside of each wing so that shell ejection ports do not open up into the deep, hollow inside of the wing for all to see.   

The masking set will save a lot of time with masking the wheel hubs and a few airframe access panels.  The exhaust stacks are great, and even though they are injection-molded, the ends are nicely hollowed-out.  Here, there’s no need for a cast resin replacement set.  The clear parts look fantastic, and the windscreen has a great extended fairing around it so gluing, masking, and painting will be a very low-risk affair.  

The markings options are awesome.  Of course, Chattanooga Choo Choo was in honor of the 2019 IPMS/USA Nationals held in Chattanooga, Tennessee.  The other five options in the box represent additionally colorful and eye-catching schemes.  There’s a good chance you’ll have a hard time choosing one, but I think I’ll probably build the yellow-tailed “Marie” since she’s really striking.  The decals (including one large sheet with a very comprehensive stencil set for the airframe, gear, wheels, prop blades, and drop tanks were printed by Cartograf, and they all look great.  I can see no technical errors in printing.  There’s also a very valuable painting guide that highlights where natural metal versus aluminum lacquer-painted surfaces are found on silver P-51s.

Weaknesses:  I cannot offer any substantive critiques of this kit.  One minor issue for some folks is that if PE parts aren’t your cup of tea, the detail on the pilot’s instrument panel is really minimal.  The idea is to either use the PE parts or kit supplied instrument panel decals.  Detail painters have little to work with.  Note that if you want to position the ailerons, rudder, and elevators in anything but the neutral position, you’ll need to remove their mounting tabs.  Also be really careful with the thin plastic strip that separates the left and right wheel wells on the lower wing half (Part B-15).  It is pretty fragile, and in some kits, it is warped/bent inward because it is so fine.  My sample is unaffected by this issue, but if that’s a problem in the kit you have, just note it will go back to its proper shape when the gear well assembly is fitted.

Eduard has wowed the scale modeling community again with what looks like a great kit of the Cadillac of the Skies.  Their 1:48 scale P-51D Mustang has a great combination of detail, accuracy, and pure allure that is really hard to beat.  Future reviews that we’ve lined up will look at Eduard’s P-51D-5, P-51D (D-15 and up), Royal Class Boxing, and a ton of aftermarket superdetail sets that have already been released.  As soon as I am done with this review, I am going to start work on this kit, and hope to bring you updates on our Facebook page “Scale Modeling with Detail & Scale.”  It’s also worth mentioning that something like only five or six thousand units of this particular edition of the kit were produced.  It is currently sold out and discontinued.  Should you find one, grab it while you can. 

Sincere thanks are owed to Eduard for the review sample.  You can visit them on the web at and on Facebook at


Haagen Klaus
Scale Modeling News & Reviews Editor
Detail & Scale